The quality protection measures for sliding contact wires can increase their service life and safety.

When purchasing a sliding contact wire, it is necessary to pay attention to the quality of the sliding contact wire. A high-quality sliding contact wire will be more durable and safe. In addition, the quality of the sliding contact wire should be noted when purchasing, and during installation

Attention will also be paid to the installation quality and the quality of its use during use.

The main material of the sliding contact wire conductor is copper, commonly used in areas of 10 square meters, 16 square meters, and 25 square meters. A set of brush housing frames running inside the conduit is a collector, which is installed on electrical mechanisms such as cranes, small cars, electric hoists, etc. The forks or traction chains on these electrical mechanisms drive these electrical mechanisms, allowing the required mechanisms to operate synchronously. The brushes will pass through the guide rails and electric hoists

Electric energy can be transmitted to electric motors or other control components. The number of poles of the collector brush is 3-16 corresponding to the number of poles in the guide rail in the conduit.

The sheath that constitutes the safety sliding contact wire is a guide tube shaped component in a semi enclosed form, which is the main component of the sliding contact wire. Inside the sheath, 3-16 bare guide rails can be embedded as needed, so that the guide rails serve as power supply wires and are insulated from each other to ensure the safety of power supply. And effectively prevent electric shock accidents for maintenance personnel during live maintenance. The length of each conduit used in electrical production is 4m, which can be connected to any desired length. Ordinary conduits can be made into straight lines or circular arcs according to special needs.