When installing the safety sliding contact wire, it is necessary to ensure the convenience of the staff and avoid difficulties in use, maintenance, and other issues. After the installation of the safety sliding contact wire is completed, check whether the conductor shell is intact and whether there is any damage or deformation. The sliding contact wire joint should be kept straight and smooth to ensure that its contact wire is in good condition. Whether the current collector can move normally within the conduit, whether the spring can retract freely, whether it can return to its original position, and whether the carbon brush blade is intact, all of which require us to check after the installation of the safety sliding contact wire to ensure the safety of the user's use.

The safety sliding contact wire can also be used in various enterprises, and is a safe and reliable mobile transmission device that enterprises trust. The safety sliding contact wire has excellent performance, gradually replacing the old-fashioned bare copper sliding wire and cable drum.

The main composition of this type of sliding transmission device is to install one or more transmission copper conductors or aluminum alloy conductors inside a semi enclosed high insulation engineering plastic shell or aluminum alloy shell, so that it can be powered by sliding contact wires. Connect the external device to the sliding contact wire collector, and then use the sliding contact wire to slide inside the sliding contact wire conduit to achieve the effect of mobile power supply. The standard length of a single pole sliding contact wire is 6 meters, and the standard length of a multi pole sliding contact wire is 4 meters. Its installation standard configuration is 1 meter to 1.2 meters, equipped with a fixed suspension bracket. Each transmission conduit joint requires 1 connector, and each joint requires an insulation isolation plate. The end cap is a closed insulation for the conduit end. The collector also needs to slide and contact the conduit to transmit power to the synchronously moving connecting equipment, The selection of current collectors is generally configured based on the model of the sliding contact wire and the current size of the equipment. The main accessories of the current collector include an orthogonal device, whose main purpose is to transmit sliding power like the current collector trolley. The main function of the current collector spring synchronizer is to pull the current collector from the outside into the sliding contact wire conduit for sliding. When installing, the first step is to determine the installation position. We should try to install it as close as possible to the transmission position, on the same side as the mobile receiving equipment, to ensure that the installation position will not be collided or vibrated, and to use it in a room temperature environment as much as possible to avoid high-temperature damage.